Mihai Sterpu Posted December 17, 2016 Share Posted December 17, 2016 Hi guys! I own a Ford Fiesta from 2014 with 113.000 Km on board. Unfortunately, my original wheels took so much damage from the romanian roads that I had to buy new rims on which I didn't mount the pressure sensors. Of course, this means that I now constantly get the "tyre malfunction" error. Is there a way to disable TPMS? I was thinking to buy an OBD2 interface (http://elm327.ro/blue21) chip and then "somehow" I would disable this from some application. Is this even possible? Did someone already try this? Any advice is much appreciated. Quote Link to comment Share on other sites More sharing options...
Trewithy Posted December 17, 2016 Share Posted December 17, 2016 Go into the menu - Vehicle Settings - Tyre Monitoring - if there is no option to switch it off try a reset. Quote Link to comment Share on other sites More sharing options...
Mihai Sterpu Posted December 17, 2016 Author Share Posted December 17, 2016 Hi, Thanks for the response. There is no option to switch it off. If I reset it, it doesn't make any difference. Quote Link to comment Share on other sites More sharing options...
MarksST Posted December 17, 2016 Share Posted December 17, 2016 You may be able to using that adapter in your link and a programme called Forscan, you might hVe to register to get into the parameters. Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted December 18, 2016 Share Posted December 18, 2016 Using FoCCus software you should be able to untick TPMS in the menu and save the config.Make sure you save the asbuilt config before making changes though so you can revert if anything goes awry.Sent from my SM-G930F Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.