Hi , I am retrofitting a front interior light which has the built in intrusion sensors for the alarm system for glass break etc. My light fitted with no sensors had two orange leds  one each side of the buttons for location lights and wondered if the sensor version of this lamp had them ? My replacement lamp has two holes one each side with a deeper slot and wondered if this is where the leds were fitted on this version of the light.

 

I think I should be able to swap the orange leds over to the new lamp if not fitted but would like to know if that was how they were designed for the sensor version.

 

Can any one confirm this or have a picture of the sensor version of the light with the orange leds lit up. Thanks The first link is like my current light and the second link is for my replacement lamp .

 

http://www.ebay.co.uk/itm/Ford-Fiesta-Mk7-Focus-Mondeo-Mk4-ambient-Interior-Light-8A6A-13K767-BB34X1/361978845634?_trksid=p2060778.c100290.m3507&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3De8908474c81d4afd90a3bb9d933dbe92%26pid%3D100290%26rk%3D4%26rkt%3D4%26sd%3D322474564914

http://www.ebay.co.uk/itm/FORD-RANGER-MK5-T6-2012-2017-INTERIOR-LIGHT-FRONT/142379744371?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

 

Yes the orange slots are for the LEDs 

 

And from my experience the ones with sensors have always had the ambient lighting 

1 minute ago, GingerFlame said:

Yes the orange slots are for the LEDs 

 

And from my experience the ones with sensors have always had the ambient lighting 

ok great

 

thanks