Jump to content
Do Not Sell My Personal Information

Leaderboard

Popular Content

Showing content with the highest reputation on 03/26/2011 in all areas

  1. Hey FOC About time I pulled my weight around here, So I thought Id make an English guide of how to upgrade/replace the MK7 Fiesta bulbs. Covered in this guide: # MK7 bulb types # How to remove the MK7 Headlight (Including pictures of the dreaded retaining Clip MWHAHAHAHAHAHAH ... pfft ) # How to Change over the MK7's sidelight, dipped beam & Indicator bulbs # How to Safely replace the MK7 Headlight back into the mounting MK7 Bulb Types Here is a brief list of the Bulbs for the MK7 Fiesta, these are also noted in your handbook. Front Lights: Fullbeam - H1 Dipped beam - H7 Sidelights - W5W Front Fogs - H11 Front indicators - PY21W Side (wing mirror) indicators - WY5W Interior lights: Interior light - W6W Reading lights - W5W Footwell lights - W5W Rear indicators - PY21W Brake & tail light's - P21/5W Rear fog light - P21W Reversing lights - W16W Number plate lights - W5W ------------------------------ Removing The Headlight: To Replace ANY bulbs in the headlight, the headlight itself must first be removed. The Headlight is fixed to the car by 2 bolts, 1 plastic rivet & 1 clip at the bottom (More on this later) One bolt at the top of the headlight - One bolt & a Rivet at the bottom of the headlight - The bolts simple unscrew, store the washer and bolt some where safe. The rivet comes in two parts, both simple pop out and do not require any other motion. There is a small gap that allows you to get your finger nail or screw driver underneath the first part and pull it out. After the first is removed, the bottom part pops out also Before removing the headlight, you need to remove the electrical connector (The purple plug) The best method to remove this, is to prize a flat head screw driver in and underneath the clip & tilt. You will hear a small click & with the screwdriver still in place the connector can be removed. DO NOT pull the connector from the wires, the connector should come out fairly easily with the screw driver in place. I removed mine with thumb and fingers of my left hand ... very little struggle at all. The Headlight is anchored in with little tabs on the headlight itself So the best method to remove the headlight is to tilt the headlight slightly away from the engine bay and then pull the headlight up and towards the windscreen. Place one hand underneath the headlight nearest the bottom (grill) and another underneath the top section where the first bolt was removed. Keep reading if you need more help.
    1 point
  2. There is absolutely no need to print in capitals/ bold etc, we can all read! There is also no mk8 fiesta!
    1 point




  • Popular Contributors

    1. 1
      unofix
      unofix
      81
    2. 2
      TomsFocus
      TomsFocus
      71
    3. 3
      StephenFord
      StephenFord
      33
    4. 4
      Eric Bloodaxe
      Eric Bloodaxe
      24
    5. 5
      DaveT70
      DaveT70
      16
    6. 6
      iantt
      iantt
      14
    7. 7
      eddie eastwood
      eddie eastwood
      14
    8. 8
      Tizer
      Tizer
      12
    9. 9
      Zen23
      Zen23
      11
    10. 10
      Turvey
      Turvey
      11
    11. 11
      ssmith93
      ssmith93
      11
    12. 12
      Phantom76
      Phantom76
      9
    13. 13
      mjt
      mjt
      7
    14. 14
      martinf64
      martinf64
      6
    15. 15
      AntonovAN12
      AntonovAN12
      5
    16. 16
      nicam49
      nicam49
      5
    17. 17
      rd457
      rd457
      5
    18. 18
      Keith H Gibbs
      Keith H Gibbs
      4
    19. 19
      Franski
      Franski
      4
    20. 20
      F0CUE
      F0CUE
      4
    21. 21
      Bar72
      Bar72
      3
    22. 22
      NewbySteve
      NewbySteve
      3
    23. 23
      alexp999
      alexp999
      3
    24. 24
      Bobr
      Bobr
      3
    25. 25
      Anthony1997
      Anthony1997
      3

×
×
  • Create New...

Forums


News


Membership