I currently have a ford fiesta LX 1.3 2003 plate, I am looking to replace the front brakes which are drums and i would like to replace them with disc brakes preferably vented.

What's the best way to go about it?, if you have any suggestions to kits or brakes that would be helpful.

Front should be disc?

They seem to be drum all round.

:S fronts are usualy discs and rear drums

http://www.pumaspeed.co.uk/product-REAR-DISC-CONVERSION-255mm---non-abs_202.jsp

Theres a conversion kit but you'd have to ask of its financially worth it realy?

You 100% sure the front's are drum? Car makers have not used that on the front for many many years. I'd understand if you said the back, but the front is unheard of since the 70's & 80's

Ive got the mk6 1.3 LX and mines deffo discs at the front. Could you take a picture n we will tell you for definate

Well i'll have a look but was told they were drum brakes as this is my first car. As you can imagine i'm an amateur

Moved this to modification discussions room :)

Indeed, no 2003 car could have front drum brakes, this would not meet the brake requirements. my old 1995 polo had front disc and that was terrible...