Jump to content
Do Not Sell My Personal Information


Installing focus MK2 accessory belts


F0CUE
 Share

Recommended Posts

I found this guide on fitting the dual stretch belts on the focus specifically the sigma/duratec with one belt for AC and the other for the rest  if you buy the kit from ford. I'm going to be doing this and thought this would help others. I take no credit for this guide. 

 

1, Wipe clean all of the pulleys to make sure that the accessory drive belt does not slip during installation

 

2,CAUTION: Make sure that the accessory drive belt guide tool is correctly fitted to the crankshaft pulley. The center of the accessory drive belt guide tool must be in the 12 o'clock position and the curved face is closest to the engine. Failure to follow this instruction may result in damage to the accessory drive belt during installation. Install the accessory drive belt guide tool (supplied in the parts kit) to the crankshaft pulley so that the center of the tool is at the 12 o'clock position (engine shown removed for clarity).

 

graphic

 

3,Position the accessory drive belt around the crankshaft pulley, power steering pump pulley and coolant pump pulley in the position shown (engine shown removed for clarity).

 

graphic

 

4,CAUTION: Make sure that an audible click is heard when the accessory drive belt installation tool locking tang is fitted to the coolant pump pulley. Failure to follow this instruction may result in damage to the accessory drive belt during installation. Install the accessory drive belt installation tool (supplied in the parts kit) to the coolant pump pulley in the position shown (engine shown removed for clarity

 

graphic

 

5,Rotate the accessory drive belt installation tool 90 degrees counterclockwise to the position shown (engine shown removed for clarity

 

graphic

 

6,

NOTE: Make sure that the accessory drive belt is correctly positioned into the grooves of the pulleys.

Slide the accessory drive belt off the coolant pump pulley and reposition around the accessory drive belt installation tool and generator pulley in the position shown (engine shown removed for clarity

 

graphic

 

7,CAUTION: Make sure that the accessory drive belt is correctly aligned to the accessory drive belt installation tool. Failure to follow this instruction may result in damage to the accessory drive belt. Rotate the accessory drive belt installation tool clockwise by hand until the accessory drive belt tension has increased (engine shown removed for clarity).

 

graphic

 

8,Make sure that this step is carried out from in front of the engine mounting. Failure to follow this instruction may result in damage to the accessory drive belt and installation tool.

NOTE: Make sure that the accessory drive belt is correctly positioned into the grooves of the pulleys.

Install the accessory drive belt. (engine shown removed for clarity).

  • Using a suitable spanner, rotate the accessory drive belt installation tool approximately 45 degrees clockwise and hold.
  • Using a second spanner, continue to rotate the accessory drive belt installation tool clockwise until the the accessory drive belt has been installed.

graphic

 

9,Using a suitable tool release the accessory drive belt installation tool locking tang from the coolant pump pulley.

 

graphic

 

10,Remove and discard the accessory drive belt guide tool.

 

graphic

 

11,Install the A/C compressor belt installation tool (supplied in the parts kit) to the crankshaft pulley at the 7 o'clock position (engine shown removed for clarity).

 

graphic

 

12,Install the A/C compressor belt around the A/C compressor pulley, under the crankshaft pulley and around the A/C compressor belt installation tool

 

graphic

 

13,Rotate the A/C compressor belt installation tool clockwise by hand until the A/C compressor belt tension has increased

 

graphic

 

14,

  • NOTE: Only turn the engine in the normal direction of rotation.

    NOTE: Guide the A/C compressor belt onto the crankshaft pulley by hand as the crankshaft pulley is rotated.

    Turn the engine until the A/C compressor belt installation tool is at the 3 o'clock position.
  •  

 

graphic

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership