jorgemef

Smax 2.0 tdci oil heat exchanger torque specs

Recommended Posts

Hi. Anyone can tell me torque specs for the oil cooler of smax 2.0 tdci?
https://goo.gl/images/YGjpQh
Mine is blown and leaking and need to replace it but I cannot find procedure in etis for this version.
Will I need new gaskets as not all kits bring them?
Thanks,
Jorge
 
Enviado do meu SM-G930F através do Tapatalk
 
 


Share this post


Link to post
Share on other sites
 

Can you get it separately or is it part of the oil filter housing from ford? May be why ford etis doesn't show torque settings for the screws. If it is separate then gaskets /o rings will probably be separate too. 

Share this post


Link to post
Share on other sites

At Ford I dont know if it is sold separated but at autodoc they sell it.

Enviado do meu SM-G930F através do Tapatalk

Share this post


Link to post
Share on other sites

Ok. I will use torque from other brands. I saw about 20nm from Bently and Bmw for similar appliance.

Enviado do meu SM-G930F através do Tapatalk

Share this post


Link to post
Share on other sites

I ended up using 10nm. It was a 4x8mm screw into the aluminium body of the oil filter housing. One of the bolts was kind of stripped but still holding. One of the seals for the oil ports which came with the kit was too large so I reused the old one. It is holding for now. Fingers crossed to not get leaks meanwhile.

Enviado do meu SM-G930F através do Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.