BugCo22

MAF sensor has no read out

Recommended Posts

Ok title says it all really. I recently changed ( about 2 weeks ago and all has been ok) the sensor in an attempt to fix another issue, however it didn't work. Driving to work today and get "engine malfunction" message on dash, so checked for codes once I got to work and got a P0101. I checked the live data and had nothing so I plugged the old one into the car and that had nothing either ?? I've been through the haynes manual and found fuse 9 might be related but the fuse is fine. Is there anything else obvious that I'm missing or am I going to have to start chasing loom connections ?? If so it's a 2.0 tdci. Also if anyone a pinout for the plug to other end, that would be awsome if you could share 🙂

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.