awesomechappie Posted January 4, 2020 Share Posted January 4, 2020 I recently replaced the blower motor on my 1.4 fiesta diesel, 56 reg, and while I was doing so I managed to pull the wire out of the back of the small black push in connector on the rear of the passenger airbag. The tiny pin/split pin connectors broke and now I can’t get the wires back in the plug and the airbag light is on on the dash. Ive been to everywhere I can think of for a replacement connector, even looked on ford partsford but no luck... Can anyone advise how to obtain new crimp connectors with that are pin/split pin end that are that narrow? Can not find them.... Also not really sure what they are called hah attached pics of the broken off end of the connector, and the ouch in plastic connector they go into before then being clipped in to back of airbag Quote Link to comment Share on other sites More sharing options...
Gazcaz Posted January 4, 2020 Share Posted January 4, 2020 I would cut either end and use two new connectors,it doesn't matter what connectors are used as long as they are joined,halfords sell loads of female/male connectors. Quote Link to comment Share on other sites More sharing options...
isetta Posted January 4, 2020 Share Posted January 4, 2020 solder the wire back on the connector? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.