Hiya, have the 1.0 EcoBoost fiesta 2019 

Wanting to upgrade hoses under bonnet. 

Ideally the induction and the boost. 

From what I can see there is limited choice expect the primary and secondary hoses. 

Will Mk7 1.0 EcoBoost parts fit? 

Thanks 

Hi,

For the Mk 8 Mountune do primary and secondary induction hoses plus the hard pipe, the part numbers appear to be the same for both Mk 7.5 and Mk 8. Pumaspeed also have a range in the Mk 8 section of their website. Mountune parts do not affect the new car warranty.

Depends why you want to change the hoses - performance/sound or appearance  - but some members have reported fitting replacement hoses on their Mk 8's and reported no change at all in performance or sound on a stock engine. 

 

Thank you Eric, and it's mainly for aesthetics. 

Thanks

Ash 

If for aesthetics, you may also be considering an engine cover? I fitted one to keep leaves etc off the engine as I have to park under trees. The cover fouls the hoses on the Mk 8 and needs trimming carefully, but if you read through the thread you will see that I concluded it didn't need trimming quite as much as we thought to begin with!😀

The thread also has info on hoses and how they look which may be of interest.

 

Hi mate. Just wondered if you for your up you induction pipe done? 

I just purchased a fiesta mk8 140 st-line and wanted to do the same thing.

Is there any others on here that have a mk8 140. Just wanted to know what mods you have done and what's worth doing? 

Thanks

Phil