Sign in to follow this  
guym

Non starting 2004 T350

Recommended Posts

Hi, so the only key to my van snapped, after much hassle I had to break the locks. I have fitted a new barrel, but its with a chipless key.. Now the van wont start. The red light (immobilser?) just flashes. The old key with the chip is stuck to the new key. The van doesnt turn over on the starter. All other electrics seem to work.

Does anyone have any ideas? The van has been stood so we are using jump leads on the battery.

thanks in advance

Guy

Share this post


Link to post
Share on other sites

You might find the chip is still too far away from the pick-up, it's only got a really short range.  Try holding it against the dash while you turn the ignition instead of taped to the other key.

Ultimately you will need to get a chipped key cut & programmed.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this