Using ELMConfig

[Critchlow847]

Hi all new here but I have read some good advice from you all.

Right so I have a 2010 galaxy 2.0 tdci ghia and I am wondering how do I make a backup of the GEM settings (swapping GEM board as the wipers dont work and everything else is fine). 

I have ordered a new GEM board same part numbers etc and I read on here that I should copy the files but I cant find the gem in ELMconfig under the galaxy tab and its also mainly in Russian thankyou

[Grisleigh]

On 9/6/2020 at 9:15 PM, Critchlow847 said:

Hi all new here but I have read some good advice from you all.

Right so I have a 2010 galaxy 2.0 tdci ghia and I am wondering how do I make a backup of the GEM settings (swapping GEM board as the wipers dont work and everything else is fine). 

I have ordered a new GEM board same part numbers etc and I read on here that I should copy the files but I cant find the gem in ELMconfig under the galaxy tab and its also mainly in Russian thankyou

Download ForScan, It is free. There are a few areas within the ForScan program that require extended license permissions but your able to obtain a 2 month free extended license...It is all explained within the Foscan website

The interface is a lot more user friendly than ELMConfig

Here is a link: https://forscan.org/download.html