wjmarks Posted October 4, 2020 Share Posted October 4, 2020 I've bought 2008 Fusion 1.4tdci diesel that is hesitating when I accelerate in and around the 2k and 3.5k rpm. Put a computer on it and it came back as injector 2 open circuit. I went and got a reconditioned injector and got it fitted - cleared all the faults and drove for 10 mins and bam! Engine hesitation and Engine management light come on again. Just put it on the computer again today and its now saying Injector 3 is open circuit. Anyone see this before - could injector 2 have been masking the fault in injector 3 - does this fun ever end? Quote Link to comment Share on other sites More sharing options...
iantt Posted October 4, 2020 Share Posted October 4, 2020 I take it you know which is injector 2 . Peugeot derived 1.4 tdci order there cyl different to normal. I.e cyl 1 is the gearbox end ,as normally you would assume cyl 1 crank pulley end. 1 Quote Link to comment Share on other sites More sharing options...
wjmarks Posted October 7, 2020 Author Share Posted October 7, 2020 Yes that was all worked out by the guy who fitted it. AFAIK my engine is from the battery side 1234. 1 Quote Link to comment Share on other sites More sharing options...
wjmarks Posted October 7, 2020 Author Share Posted October 7, 2020 Just got injector number 3 replaced definitely running better but still a hesitation at 2k revs and around 3.5k when under load. Now also getting a very strong smell of diesel in the cockpit when at idle speed. This POS is giving me grief at every turn. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.