I’ve purchased some HEKO wind deflectors for my Focus ST Line Mk4, do you know which way the rear ones are meant to be? With the HEKO logo at the back or at the front? I have done mine to the back (see pics) but it looks a little off as the width at the front seems thinner, and isn’t in line with the back of the front ones, if you know what I mean. So wasn’t sure if this was to be at the back? So I would just have to swap them around. 
 

I don't know for sure but I agree they look wrong like that...would swap them and see if they look any better!

I've got a set of Heko deflectors and yeah, you got them the wrong way round - the HEKO logo for the rear wind deflectors should be towards the front of the car. Essentially the thing should look like it's tapering off to the rear.

Hope that helps.

2 hours ago, TomsFocus said:

I don't know for sure but I agree they look wrong like that...would swap them and see if they look any better!

Tom, almost didn't recognse you with your new fancy avatar! LOL

3 hours ago, StephenFord said:

Tom, almost didn't recognse you with your new fancy avatar! LOL

I thought it was how Tom feels after driving his new Focus 😮😉

1 hour ago, Wino said:

I thought it was how Tom feels after driving his new Focus 😮😉

Turns out there isn't a Mr Queasy!

 

Never understood the point in wind deflectors? Maybe flicking the ash off whatever your smoking? 
Looks like you’ve been smoking something to get them the wrong way round 😆 

I’ll get my jacket !

Hi. I have the Focus ST Line X mHEV 2020 Reg. Can you please point me in the right direction for the wind deflectors. On sites when I put my Reg in a to see if compatible with my car they are not. Thanks

The mirrors closes without any interference with the deflectors? Can someone send a pic with them closed? Thanks

9 hours ago, tsilva30 said:

The mirrors closes without any interference with the deflectors? Can someone send a pic with them closed? Thanks

This is them fitted to my Mk2. Heko would not design a deflector that would interfere with mirror closing...

What make are these and where did you buy them?  Did you fit them yourself?

I got quoted an hour's labour by Ford and that was just fitting the front ones.

14 hours ago, chris carter said:

What make are these and where did you buy them?  Did you fit them yourself?

I got quoted an hour's labour by Ford and that was just fitting the front ones.

They are Heko, all 4 took me about 20 minutes to fit (bought from Ebay, 100s of listings!) - really easy, loads of YouTubes if you need them as well as the Heko site...If Ford are quoting an hour for 2, just shows how incompetent they are!

3 hours ago, StephenFord said:

They are Heko, all 4 took about 20 minutes to fit (bought from Ebay, 100s of listings!) - really easy, loads of YouTubes if you need them as well as the Heko site...If Ford are quoting an hour for 2, just shows how incompetent they are!

Thanks, thought it was pricey.

On 5/26/2021 at 8:54 AM, Bulldogs said:

I’ve purchased some HEKO wind deflectors for my Focus ST Line Mk4, do you know which way the rear ones are meant to be? With the HEKO logo at the back or at the front? I have done mine to the back (see pics) but it looks a little off as the width at the front seems thinner, and isn’t in line with the back of the front ones, if you know what I mean. So wasn’t sure if this was to be at the back? So I would just have to swap them around. 
 

did you have to use the metal clips or did you fit them using the adhesive tape? 

2 hours ago, Deanomogs said:

did you have to use the metal clips or did you fit them using the adhesive tape? 

For a secure fitting, you need to use both... (Best to wait for a warm day, or you could use a hair dryer to heat the adhesive tape). Also, with the clips, make sure the toothed side face inwards towards he car.

 

On 8/9/2023 at 8:08 AM, StephenFord said:

For a secure fitting, you need to use both... (Best to wait for a warm day, or you could use a hair dryer to heat the adhesive tape). Also, with the clips, make sure the toothed side face inwards towards he car.

 

I've fitted my heko's over the weekend but when I do my drivers window all the way up the pinch protection kicks in and the window goes back down. I've had a good look but can't see what the window is catching on. any advice on how to sort this please?

2 hours ago, Deanomogs said:

I've fitted my heko's over the weekend but when I do my drivers window all the way up the pinch protection kicks in and the window goes back down. I've had a good look but can't see what the window is catching on. any advice on how to sort this please?

There's a way to reset the protection position but my car isn't sophisticated enough to have this function so I can't remember advice I've read. I think you have to hold button up for a few seconds. Someone sensible should be along soon...

RESETTING WINDOW BOUNCE-BACK



WARNING:  Bounce-back is off until you reset the memory. Take care when closing the windows to avoid personal injury or damage to your vehicle.

 

If you have disconnected the battery, you must reset the bounce-back memory separately for each window.

Carry out all steps within 30 seconds of starting the sequence.

1. Close the window.

1. Press and hold the window control switch until the window is fully open.Keep the switch pressed for a few seconds.

1. Lift and hold the switch until the window is fully closed.Keep the switch held for a few seconds.

1. Press and hold the switch until the window is fully open.Keep the switch pressed for a few seconds.

1. Lift and hold the switch until the window is fully closed.Keep the switch held for a few seconds.

Note:   Repeat the procedure if the window does not close when you use one-touch.

 

Window Bounce-Back - Resetting Window Bounce-Back (fordservicecontent.com)

all sorted now, thanks again guys