Skip to content
View in the app

A better way to browse. Learn more.
Ford Owners Club - Ford Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.



Join the Independent Ford Owners' Club

Our community has been built by enthusiasts, for enthusiasts, and proudly run by Ford owners' for over 18 years. As an independent, non-official club, everything you’ll find here, advice, support, and opinions, comes directly from members with genuine Ford ownership experience.

Join our friendly community... it's Free!

 

Ford Focus Back Dash Wiring Loom NIGHTMARE!!!

de9972
de9972
in General Ford Related Discussions

Featured Replies

I'm at the point of scrapping my car...! Rodents have eaten part of my back dash wiring loom - I have searched high and low for the correct wiring loom - part no. 8m5t-14401-zdd for 2009 Focus petrol auto. It seems that this loom is rarer than the Holy Grail. The loom had shorted and melted in numerous places. I tried replacing parts of the loom but it was just too damaged. I have replaced the loom with a 2009 - 2011 loom from an RS Mk 2 - Part no.8m5t-14401-ZMD. Now I must stress that I know very little about electrics but learning fast!!! So the RS loom was from a keyless car, which I think I've sorted. when I try to start the car the immobilizer light starts to flash quickly, then giving a 1-1 code. followed by a beep and three malfunctions - engine, Transmission & Steering.  My hazard lights work along with interior lights, main/low beam, central locking and Horn. I've sent my ECU off to be looked at, which has no faults reported. My next plan is sending the instrument cluster off to be checked. I have checked all fuses, relays which are fine. Now I have checked my OBD which wont connect to a reader. Using a multimeter on the 14 and 6 pins I'm not getting 60hms, but I don't no what this means. Is there a short/earth problem? Any help would be really REALLY appreciated. 

Thanks!!!!

  • Quote


    • Latest Deals

    Ford UK Shop for genuine Ford parts & accessories

    Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...
    Go to topic listing

    The "Digestive"

    • The Digestive Forum Roundup (24th May - 31st May 2026)

      Steve ·
      The Digestive Forum Roundup (24th May - 31st May 2026) We hope this email finds you well and enjoying your week. As always, our forum has been buzzing with activity, so we’ve compiled the highlights for you. Plenty of interesting discussions are taking place, especially around the Ford Focus and Fiesta models. Starting off with the Focus, many members have been discussing issues with the Emergency Call System, particularly in the Mk4 model. PLB raised concerns about persistent malfunctions, a se
      Steve
      Steve
      • 219 views





    Background Picker
    Customize Layout

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.