load66 Posted January 3, 2022 Share Posted January 3, 2022 ford galaxy 2017 go in to limp mode done diagnostic check p code p06dd engine oil pressure control circuit performance fault / stuck off have replace oil pressure sensor still the same any help thanks Quote Link to comment Share on other sites More sharing options...
unofix Posted January 3, 2022 Share Posted January 3, 2022 Hi Martin can you confirm which engine you have ? Quote Link to comment Share on other sites More sharing options...
load66 Posted January 4, 2022 Author Share Posted January 4, 2022 2.0 diesel Quote Link to comment Share on other sites More sharing options...
TheSentinel85 Posted August 4 Share Posted August 4 I’ve also just changed my oil pressure solenoid and just had the P06DD code again 😕 Quote Link to comment Share on other sites More sharing options...
rd457 Posted August 4 Share Posted August 4 1) New does not always mean good. 2) The circuit referenced as faulty does not just consist of the solenoid, there's also the wires, the plugs, and ground connections. An issue of any of these could be at fault rather than the solenoid itself. 2 Quote Link to comment Share on other sites More sharing options...
TheSentinel85 Posted August 5 Share Posted August 5 So check the wiring from the connector on the solenoid and trace it back? Quote Link to comment Share on other sites More sharing options...
rd457 Posted August 5 Share Posted August 5 Yes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.