Thisdave2022 Posted April 11, 2022 Share Posted April 11, 2022 Any one know were the ECM(electronic control module) is in a 2008 ford galaxy 1.8 tdci. There one under the passanger side foot well but I'm not sure if there is another one in the engine bay, ECM fault code says it's corrupted along with over 20 to 30 other random codes . Also it starting to jerk at low speeds. Cheers Quote Link to comment Share on other sites More sharing options...
iantt Posted April 11, 2022 Share Posted April 11, 2022 Behind the n/s front inner arch liner. Wheel off , inner plastic arch liner off and you will see it . There probably will be 3 or 4 security bolts that holds the cover on to stop tampering of ECM connectors 1 Quote Link to comment Share on other sites More sharing options...
Thisdave2022 Posted April 11, 2022 Author Share Posted April 11, 2022 Thanks I'll have a look over the weekend, will it need to be remapped? im replacing it woth 2nd hand one, never changed ecu/ecm so I'm not sure if it's just a simple swap and go. Cheers Quote Link to comment Share on other sites More sharing options...
iantt Posted April 12, 2022 Share Posted April 12, 2022 Will not be swap and go as far as im aware. The ECM will need programming. Quote Link to comment Share on other sites More sharing options...
Thisdave2022 Posted April 12, 2022 Author Share Posted April 12, 2022 1 hour ago, iantt said: Will not be swap and go as far as im aware. The ECM will need programming. OK I'll get in touch with a auto electric specialist, it's driving fine today but hopefully it won't just ***** itself 😂 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.