Electric window problems

[Paul469]

Hi, I've recently purchased a 2006 fusion, the passenger window will only go down and not up, I have replaced the motor and the switch but still no improvement, any ideas anyone? Thank you

[fullwavebridge]

either loom from door to pillar, cables snap inside the insulation i believe and a common occurance....

OR the drivers side switch i believe is interlinked to the passenger side switch.

I haven't had the problem yet

[unofix]

The master switch is on the drivers side. A fault with that switch can stop the passenger side window operating correctly.

[Paul469]

Hi everyone, just an update after purchasing a motor and 2 switches, 1 for either side, still can't get it to work! In this weather am really missing it, any other ideas suggestions? Please and thank you.

[fullwavebridge]

What is your exact issue... just to clarify ?

Passengers window will not go up?

Is drivers side ok - up and down ?

replaced both door switches, and passenger side motor ?

You will need a multimeter, which can be used to measure continuity (resistance / ohms).

Do you have a wiring diagram ?

[Paulkp]

The "Up" limit switch might be open circuit ?