I wanted to share something that might be useful for fellow Ford owners!

As part of my sound system upgrade, I designed and 3D printed speaker adapters for my Mondeo. Since these adapters fit multiple Ford models using the same commercial speaker brackets, I’ve uploaded them to Printables for anyone to download and use.

Material Recommendation: I suggest printing in ABS or ASA for better durability.

🔗 Download here: Ford Speaker Adapters

Below is a list of Ford models to my knowledge these will also fit

B-Max (2012 - 2018) Front and rear doors
C-Max (2010 - 2019) Front and rear doors
Ecosport (2013 - 2023) Front and rear doors
Edge (2015 - 2021) Front and rear doors
Endura (2018 - 2020) Front and rear doors
Fiesta Mk7 (2008 - 2017) Front and rear doors
Fiesta Mk8 (2017 - 2023) Front and rear doors
Focus Mk3 (2011 - 2018) Front and rear doors
Focus Mk4 (2018 Onward) Front and rear doors
Ka Mk3 (Ka+) (2016 - 2020) Front and rear doors
Kuga (2013 - 2019) Front and rear doors
Mondeo Mk4 (2007 - 2014) Front and rear doors
Mondeo Mk5 (2014 - 2021) Front and rear doors
Mustang (2015 - 2023) Front doors
Mustang Mach E (2021 Onward) Front and rear doors
Puma (2019 Onward) Front and rear doors
Ranger (2011 - 2022) Front doors
Transit Connect (2013 - 2022) Front and rear doors
Transit Custom (2013 - 2024) Front and rear doors

Please note, while I believe these will work for the listed models, I can’t guarantee compatibility with every version of the listed cars. Let me know if you give them a try! Feedback is always welcome. 🚗🔊

What a brilliant and novel post. Brought up in the 60s watching Star Trek with their, 'replicator' (a voice activated machine that would replicate pretty much anything on command), this stuff was all science fiction. I love it...

End of the day I produced for my own use, but after I finish printing the 2 for the rear of my Mondeo, it would go forgotten about, as you can only replace so many factory speakers in a car.

I might as well share so it gets used, and the small reward from the downloads if people choose to download and print for themselves.

Yea I could print and sell them, but my printer does what I need it for, but is not something I would want to run none stop.

2 of these took 17 hours to print on my printer

 

I have since put together a basic ring that clips in perfectly behind the tweeter grills, which are currently sized for my Alpine tweeters and are friction fit, but could easily be adapted for other tweeters.

These will be for the 

Mondeo Mk4/ S-Max Mk1 & Galaxy Mk3 to my knowledge