Hello Everyone!

I've recently add reverse camera to mine 2020 Transit Custom with Sync 3. Generally everything went fine, I've activated it in ForScan but still have a problem adding Dynamic Guidelines and Zoom.

Has anyone solved this kind of problem, and will help with that?

Regards!

I may be corrected but if it's not a genuine Ford camera the lines won't work

You are probably right, but camera is genuine.

OK,

Have you been through all the available settings in FORScan to see if it's anywhere else?

Like PAM, BCM or ACM maybe?

I've activated it in BCM and APIM, not in binary mod, but "standard" and changed values to Enable.

You may need to update firmware in PAM to support

I would ask question on FORScan forum and see what comes back

I found a post similar to my problem but I do not know, how to make it:

Maybe you have some ideat?

2 hours ago, Dziubus said:

I've activated it in BCM and APIM,

The wiring is not usually fitted between the BCM and APIM on vehicles that were built without a factory fitted camera.

What does it mean?

I do the new harness to APIM (3 cables, 2x camera + shield), and to BCM (LIN+Power). Everything is working fine except Dynamic Guidelines and ZOOM.

8 minutes ago, Dziubus said:

Everything is working fine except Dynamic Guidelines and ZOOM.

 

@piotrmod might be able to offer some ideas