Does anyone know if the one touch up/down function can be switched on for all windows on a EB Titanium.

All the switches have the 2 click just only works on the driver door

cheers

Steve

Could be the ECU that needs this switching on, but if it clicks twice, it should set the motor off, dont even think it runs through the ECU though...

Do you actually feel it click twice?

all four switches click twice but only the driver side works for one touch

Heard that you have to change the relay behind the door panel that controls the window motor, to the same as the drivers as thats what controls 1 touch so all other doors have to have the same relay..... not looked into it enough myself yet though....

is there any way of getting a wiring diagram for the car - that should have the answer

You could find one on google, some people on here have found specific wiring diagrams but not sure I have seen a full car one :(

Hi, you may have found your answer now but I've just had the same problem on a 2002 Focus after disconnecting the battery..

The windows need to be 're-taught', you need to go round each window in turn and hold the 'up' side of the button (2nd click) until the window is all the way up, then press and hold 'up' again 3 times, for around a second each, repeat for each window. If one-touch down does not work, repeat, but in the 'down' direction

Hope this helps

Hi, it isn't quite the same process to program the windows on the 2011 Focus as the previous models:

1. Lift and hold the switch until the

window is fully closed.

2. Release the switch.

3. Lift the switch again for one more

second.

4. Push and hold the switch until the

window is fully open.

5. Release the switch.

6. Lift and hold the switch until the

window is fully closed.

7. Open the window and try to close it

automatically.

8. Reset and repeat procedure if the

window does not close automatically.

Chris

Chris

just picked up your reply up.

all windows now programed and work on one touch and global open/close

many thanks much appreciated

Chris

just picked up your reply up.

all windows now programed and work on one touch and global open/close

many thanks much appreciated

Can anyone check this with engine running vs switched off. Just programmed mine as previously one touch worked with engine switched off but didn't work with engine running (had to hold switches).