Hey peeps im thinkin of getting my mk2 zetec tarted up a bit, im thinking a custum st front end with splitter, st sideskirts and an rs rear bumper. would a 2009 focus rs rear bumper fit straight on or are the sides to wide?thanks

Hey peeps im thinkin of getting my mk2 zetec tarted up a bit, im thinking a custum st front end with splitter, st sideskirts and an rs rear bumper. would a 2009 focus rs rear bumper fit straight on or are the sides to wide?thanks

The rear arch and fron side panels on the RS are wider than the Focus zetec and the ST, it would be possible to fit a front panel and side fenders from as RS to the front of the car but fitting to the rear you would have to cut off the existing arch panel and weld on the RS ones to keep with the flow of the rear bumper,

unless you cut and join the rear bumper in the centre this may sort things out.

Purchased a kit myself mate planning a Zetec S same skirts as the ST so click the link Side Skirts 5 Door their genuine kit primed and ready for spraying also Zetec S front lip and Rear apron have all these up the attic waiting on funds to get them sprayed and fitted, already fitted the ST rear spoiler the RS Spoiler will also fit fine just the bottom of the car is wider.;) and regardless of what body you put on it you will definitly need these Custom Built Mud Flaps bought a set myself their proper quality mate.

i was thinking of getting this but its for the mk3 so i would also have to change the slam panel bonnet and lights, i rang them and they said they were doing the same kit only for the mk2 but they havnt got any pics yet.

http://www.extreme-sportscars.com/rs_focus/prices.html

Hey peeps im thinkin of getting my mk2 zetec tarted up a bit, im thinking a custum st front end with splitter,

Ive just found a focus Mk2 with the full RS kit fitted, very cheap for the whole car, not sure about the alloys though, Click Here:)

Ive just found a focus Mk2 with the full RS kit fitted, very cheap for the whole car, not sure about the alloys though, Click Here:)

for that cash ide just buy an rs lol

for that cash ide just buy an rs lol

T be honest, i would too, its not a mk1 RS or a 100% Mk2 Replica its obvious its a wana be RS,

id go the whole hog and convert the full body to replicate the Mk2 RS

I wonder what he tarted up, wether it was an LX or Zetec S...

I wonder what he tarted up, wether it was an LX or Zetec S...

My guess is it was a titanium or ghia because he says in the listing he has the gauges in the dash, and to mount them properly you need the box dash to slot the pod in to, id love to know the diagram for the loom to make the gauges work as these ones are electronic B)