PaulWez Posted September 10, 2011 Share Posted September 10, 2011 Hey all! Just decided to become a member even though I've had my fiesta for nearly 9months now. So far changes are: colour coded rear mudflaps zetec S rear roof spoiler rear carbon vinyl rear valance sprayed black gloss black vinyl under headlights carbon panel at front badge DMB badges all round sunstrip front lower bumper carbon vinyl wrapped AP Coilovers fitted lowered 90mm front and 75mm rear Coilover kit is excellent, front is wound down to bottom stops and rear doesn't even have the adjusters fitted in it. Is as low as can be with this particular kit. Handles excellent, like glue on corners plus michelin pilot tyres all round helps too next plans are to change the wheels, I have white fx2's to put on at some point, they're boxed in the garage. hope these pics have uploaded correctly below to show what I've done so far, all the work that has been done on the car and that is listed has been carried out by myself. Quote Link to comment Share on other sites More sharing options...
briggsy Posted September 10, 2011 Share Posted September 10, 2011 Ever been over a speed bump? :P Thats really low at the front lol Chrome moulding :( Quote Link to comment Share on other sites More sharing options...
PaulWez Posted September 10, 2011 Author Share Posted September 10, 2011 LOL, I love the speed bumps.... so much so I stop infront of them and kiss it with my bumper :) chrome moulding? :/ Quote Link to comment Share on other sites More sharing options...
Lenny Posted September 10, 2011 Share Posted September 10, 2011 B) Very Nice mate, looks really good, have you considerd spraying the rear view mirror check my link below this post, ive done mine Quote Link to comment Share on other sites More sharing options...
Danny87 Posted September 11, 2011 Share Posted September 11, 2011 Looks nice to me mate, good work :). It is pretty low on the front, what's it like seriously? My sisters boyfriends MK5 Zetec S is lowered about the same as your front all the way around, there's **** loads of scrubbing and the new alloys he's put on are like 16' so there's about an inch between the back tyre and arch.. lol Dan Quote Link to comment Share on other sites More sharing options...
Tato Posted September 11, 2011 Share Posted September 11, 2011 Looks cool...but slightly to low ;) Quote Link to comment Share on other sites More sharing options...
mikester Posted September 11, 2011 Share Posted September 11, 2011 looks great, i thought it was a zetec s not reading the text, you've done a great job looks mean. Quote Link to comment Share on other sites More sharing options...
hula89 Posted September 12, 2011 Share Posted September 12, 2011 The front looks very mean really aggressive i like it alot tbh. Quote Link to comment Share on other sites More sharing options...
PaulWez Posted September 14, 2011 Author Share Posted September 14, 2011 Looks nice to me mate, good work :). It is pretty low on the front, what's it like seriously? My sisters boyfriends MK5 Zetec S is lowered about the same as your front all the way around, there's **** loads of scrubbing and the new alloys he's put on are like 16' so there's about an inch between the back tyre and arch.. lol Dan it only ever scrubs on long speedbumps, which is fine cause its only the underneath plastic valance part so i dont mind. The short and high semi circular speedbumps are just a no go though, it will not go over without hitting chassis and god knows what else, done it once and never again so other than the one type of speed bump it goes everywhere..... o and minus a few multistory car parks ;) Quote Link to comment Share on other sites More sharing options...
PaulWez Posted September 14, 2011 Author Share Posted September 14, 2011 Thanks for the positive feedback guys! love when i'm told it's too low.... never too low! :P try going round a corner with your butt on the tarmac... little go kart! not sure what else to do next regards visual aspects? any opinions no matter how outlandish I'd like to hear :) was thinking maybe to attempt a carbon roof wrap or some take on the st500 bonnet decal to fit the bonnet lines?! Quote Link to comment Share on other sites More sharing options...
Ryan9684 Posted September 14, 2011 Share Posted September 14, 2011 side skirts, though you dont have much space for them... there really is such a thing as too low. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.