Hi there guys,

my partner has a 2.5 v6 ford cougar - tcs and abs is exactly same as the mk2 mondeo. some fool has cut the wires from the tcs/abs mod off at the junction box for the front drivers abs sensor - sensor and it's connection is in tact - just the wiring for it through too this box is missing. wiring loom not its own part so ford quoted about 200-400 smackeroons for it - I've been quoted £25 from a scrappy lol. - no brainer.

The 2.5 v6 engine is a beast and leaves very little space for working on - the tcs box in the cougar is located under the servo on passenger side - hard to get too.

i am needing to take the plug and wiring back to the sensor to get the car through the mot. I am thinking if this is the same - there will be more room in the mk 2 mondeo to locate and remove what I need.

can someone please advise where the TCS box is located in the mk2 mondeo please? Need to get this asap as MoT is next week :(

thanks guys.

Edited February 2, 201313 yr by jeebowhite
Removed reference to swear word.

Might be worth asking the question in the mondeo forum as there should be some more knowledge over there! Unfortunately, I cant really advise.