Jump to content
Do Not Sell My Personal Information

Newby Looking For A Little Bit Of Help


Recommended Posts


I have recently had a leak coming into passenger footwell through pollen filter which i have sorted however i have had a couple of electrical issues appear since.

1st issue is airbag warning light flashing code 42 which indicates issue with front crash sensor so dropped radiator and cleaned up connectors to no joy. cleaned seat connectors just to be sure they were not an issues but problem remains.

2nd issue is battery light coming on so looks like issue with smart charge system. I have tested and confirmed 13.8 volts from alternator with 3 pin connector unplugged and no visible damage to any of the wiring i traced back.

I have discovered that the primary connector at bottom of passenger side a pillar was wet so has been dried however i would like to confirm if the airbag sensors and smart charge would both pass through this connector ?

If this is the case can any one please advise where i can find a wiring diagram and pin outs for this connector so i know which pins to concentrate on ?

Cheers again


Edited by Stoney871
tidied post for random characters
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...