Jump to content
Do Not Sell My Personal Information


Fiesta Mk7 Speakers


b1g_dav3
 Share

Recommended Posts

Hey folks, quick question here; what are the Speakers in the Zetec (S) and Titanium spec vehicles, as I understand they're different?

The Titanium is listed as having 8 Speakers whereas Zetec (S) only have 6 Speakers, so what's the difference, are all the speakers different in the Titanium, or is it just slapping in another speaker somewhere?

Looking at an upgrade, but don't really want to end up with some crappy after market ones I end up wasting on, would rather spend on a sub.

- Thanks

Link to comment
Share on other sites


Six speaker set up is four front and two rear, main speaker in the front door with the tweeter near the interior handle, rear speaker in the rear door or quater panel but on the eight speaker set up the rear Speakers have a tweeter built in to the main speaker

Going by Ford's website the eight speaker set up is Titanium and Titanium X only, six on the Zetec and Zetec S

That's a lot of Speakers :D

Link to comment
Share on other sites


These are what I ordered for a 5 Door:

Ford-Front
Speaker (Tweeter)
Part Number:
1678269(QTY2)

Ford-Speaker
(Woofer)
Part Number:
1678270(QTY2)

Ford-Rear
Speaker
Part Number:
1678271(QTY2)

They are all plastic rather than paper cones and the rears have a tweeter built in.

Link to comment
Share on other sites

These are what I ordered for a 5 Door:

Ford-Front

Speaker (Tweeter)
Part Number:

1678269(QTY2)

Ford-Speaker

(Woofer)

Part Number:

1678270(QTY2)

Ford-Rear

Speaker

Part Number:

1678271(QTY2)

They are all plastic rather than paper cones and the rears have a tweeter built in.

That looks cheap enough to do!

How simple is it to swap them out?

Link to comment
Share on other sites

That looks cheap enough to do!

How simple is it to swap them out?

Pretty simple once you know how to take the door cards off (I followed iNath's video for fronts and used Haynes for rear). Then as they are oem, just unscrew the old ones, disconnect the speaker plug and put the new one in its place.

I took loads of pics of the process but don't think I uploaded them in the end. Will see if I can dig them out.

Link to comment
Share on other sites

Pretty simple once you know how to take the door cards off (I followed iNath's video for fronts and used Haynes for rear). Then as they are oem, just unscrew the old ones, disconnect the speaker plug and put the new one in its place.

I took loads of pics of the process but don't think I uploaded them in the end. Will see if I can dig them out.

Awesome sounds like another change for me!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership