I seen this photo earlier on Instagram

Does anybody know how this is done ? As the bonnet has

A notch around the does badge, so could this be photo shopped or just a custom bonnet ?

Also I was thinking on possibly fitting the rear diffuser from the new ST,

As I think it looks a lot better than the zetec S, (and the front from the old zs looks a lot better anyway) has anybody done this ? And does anybody know of it would fit ?

Finally how hard is it to paint/wrap the interior plastics ? And do you have to completely remove them to paint them ?

Here are some mods I've done so far anyway..

Alloys done white

DMBs put on front and back, and steering wheel

Asian grill fitted

For the ST rear diffuser it will fit but also requires the corner pieces.

The bonnet will have had the badge gap either filled with a peice of metal or filled with body filler or glass fibre to achieve that look. There is probably a manufacturer out there making them like this but not heard of anyone doing one. You local body shop should be able to alter yours to look like that.

The interior plastics have to be removed and most people paint them themselves. There are a few who have plasti dipped them

I was thinking on possibly fitting the rear diffuser from the new ST,

As I think it looks a lot better than the zetec S, (and the front from the old zs looks a lot better anyway) has anybody done this ? And does anybody know of it would fit ?

I've done it to my ZS-

E5GDM

where do you get it from and how mush do it cost.

http://www.european-parts.net/catalog/product_info.php/products_id/1488/osCsid/f0vm0117dfh6bnkglo41ifdnt7

145.06 EUR

I seen this photo earlier on Instagram

image.jpg

Does anybody know how this is done ? As the bonnet has

A notch around the does badge, so could this be photo shopped or just a custom bonnet ?

Also I was thinking on possibly fitting the rear diffuser from the new ST,

image.jpg

As I think it looks a lot better than the zetec S, (and the front from the old zs looks a lot better anyway) has anybody done this ? And does anybody know of it would fit ?

Finally how hard is it to paint/wrap the interior plastics ? And do you have to completely remove them to paint them ?

Here are some mods I've done so far anyway..

image.jpg

Alloys done white

DMBs put on front and back, and steering wheel

Asian grill fitted

Just to make you feel better, if you look at the instagram picture it has indeed been photoshopped (an not particularly well, I might add). If you look at where the badge was/is you can see the imperfections where the smudge tools etc have been used, its not perfectly smooth. tempted to have a go at that myself if im honest!

.