Mk5 Engine Light

[ianm2585]

i have a mk5 (w plate) 1.25 zetec with no engine light i tried the light test and no light comes on i removed the dash as i was going to swap the washer level bulb over but there appears to be no bulbs on the rear of the dash just the two top ones any ideas on this would be very welcome . also whilst in the test mode on the dash fault code 5967 appeared which i beleive is abs strange as not fitted to my vehicle any ideas on that welcome as well

[jeebowhite]

I believe that these bulbs are SMD LED Bulbs, which may be why you are not seeing anything. Easiest way to check is to remove the cluster, plug it in, and then start the car to electrics. Look between the slides and you should see the little LED's light up.

Two options, would be to desolder and solder a new bulb (if you are confident in doing so) or otherwise, you would need to replace the cluster.