Jump to content
Do Not Sell My Personal Information

Rear Wheel Bearing

Recommended Posts

Easy job, its not a press job on them, worst case scenario you will need a small amount of heat

Is the bearing already in the hub not like the fronts were it has to be pressed?

I've seen videos and it does look easy lol. Wheel off, caliper off, remove large bolt in middle, remove torx screws and pull?

Link to comment
Share on other sites

It is easy enough, caliper off, 4 torx bolts abs sensor unplugged and give hub a tap and its out, only difficult bit sometimes is thebtorx bolts can be tight to release, tap the torx socket on so its fully in.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...