Skip to content
View in the app

A better way to browse. Learn more.

Ford Owners Club - Ford Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.



Join the Independent Ford Owners' Club

Our community has been built by enthusiasts, for enthusiasts, and proudly run by Ford owners' for over 18 years. As an independent, non-official club, everything you’ll find here, advice, support, and opinions, comes directly from members with genuine Ford ownership experience.

Join our friendly community... it's Free!

 

Coolant Not Circulating After New Pump

Featured Replies

Really hope one of you guys can help me with my 2000 Focus 1.6 zetec petrol , i have just fitted a new water pump after the bearing collapsed and threw the belt off, i then flushed it through and started to refill with new coolant and after putting 2 ltr in the header tank showed at max. i then ran the car with the cap off ,the heater got hot but the radiator didn`t.

I put the belt back on using a diagram i found on the net and the pump is an after market one from Bullseye ,

Could it be a bad air lock or could the belt be wrong and turning the pump the wrong way ?????

i`m stuck so any help would be greatly appreciated.



Could be you got belt going the wrong way.

From memory I think the pump pulley needs to be turning anticlockwise, if it isn't, the belt is routed incorrectly.

Might be worth flushing the rad too just to be sure it isn't blocked.

FYI.

Taken from the Ford TIS, well worth getting a copy if you have a windows PC.

Acc_Drv.pdf

Focus_Drain_Fill.pdf

I'm quite concerned an empty system only took 2 litres of coolant.

Air lock is one part, it sounds like the reason the rad isn't getting hot is because the hot water isn't getting there to spread it. If I was you I would drain it again, flush it and run the engine with just water. Then see if that works as expected

just a possibility,dunno if these cars suffer from this problem but the galaxy does.

within the return pipe is a little ball that becomes wedged in and stops the coolant from returning.

might be worth a looksie?

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

The "Digestive"






Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.