Hi all,

I was wondering if anyone knew off the top of their head the measurements for the following badge sizes for the Mk7.5 Fiesta - I'm in the process of having some badge overlays made up, and its too late at night to be out measuring them now, so thought I would ask :)

Badges:

• Front Badge
• Rear Badge
• Steering Wheel Badge
• Wheel Badge

Thanks in advance!

I'm in the same boat as you mate! Did you get the sizes in the end?

I know for certain that wheel centres are 55mm, pretty certain that the steering badge is 55x22mm and that the front and rear are a 100mm x something else i cant quite remember off the top of my head. Ordered my last set for my ZS from gelbadges.com before they closed down and they had set sizes.

I'm in the same boat as you mate! Did you get the sizes in the end?

I know for certain that wheel centres are 55mm, pretty certain that the steering badge is 55x22mm and that the front and rear are a 100mm x something else i cant quite remember off the top of my head. Ordered my last set for my ZS from gelbadges.com before they closed down and they had set sizes.

And now you've come to me ;) and I have no sizes, haha!

Haha! Still need to get round to measuring them up!

I've just printed them at the above sizes

Sent from my HTC One_M8 using Tapatalk

I'll measure up the badges tomorrow and post the sizes as a reference for everyone

Just checked the measurements and they are as follows:

• Front and Rear - 100x38mm
• Steering Wheel - 58x22mm
• Wheels - 55mm

Hope this helps!

Does anyone know whether the st180 steering wheel is the same dimensions as the mk7.5 wheel apart from the lower ST thin badge