Simba2865 Posted February 4, 2016 Share Posted February 4, 2016 Hi all I have just purchased a 2011 Ford Focus 1.6 zetec TDCI and wish to change the interior light bulbs to blue ones , looking at a video on you tube they seem to just pull down from the back , I have tried this but they seem stiff ? Do they just pull down but there a bit tight ? Thanks all Quote Link to comment Share on other sites More sharing options...
dezwez Posted February 6, 2016 Share Posted February 6, 2016 i put a thin screw driver in the edge to release it Quote Link to comment Share on other sites More sharing options...
dezwez Posted February 6, 2016 Share Posted February 6, 2016 BTW Hi Welcome Quote Link to comment Share on other sites More sharing options...
Simba2865 Posted February 7, 2016 Author Share Posted February 7, 2016 Managed to get them open was just bit stiff as prob never been moved till now thank you , only problem is there's no bulb inside only a pcb with an Led on the board ? Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted February 8, 2016 Share Posted February 8, 2016 That would be right. Maybe solder in some aftermarket strip LED's? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.