Jump to content
Do Not Sell My Personal Information

Suspension leg and wheel hub assembly help


Recommended Posts

I've had a look on the forums and couldn't find what I needed, I have a Fiesta MK6 1.4 petrol and intend to replace the suspension leg and wheel hub assembly on the front driver's side after a curb collision driving over black ice.

A general guide on what to do would be very helpful but knowing what tools and size of bolts/nuts would be great before I start!

Could I use the brakes I have on now instead of using the ones that came on the new parts or would that be too complicated as I don't really want to deal with brake fluid etc. (as I bought a whole front right corner that came with the brake discs and calipers on the hub)

I have experience of removing standard suspension and installing coilovers but on a Corsa B and have recently bought the Fiesta so am rather clueless haha

Any help is appreciated guys

Thanks Jordan :smile:



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...