Jump to content


Show
Photo
* * * * * 1 votes

Recent Mods


  • Please log in to reply
316 replies to this topic

#256 Brigante

Brigante

    Resident Ranter

  • FOC Supporters
  • 2,400 posts
  • Name: Charlie
  • Ford Model: Focus Ghia 1.6 115BHP
  • Year: 2005
  • Location: Nottinghamshire
Contributor

Posted 24 March 2013 - 07:23 PM

lol bet it looks confusing but then so does mine

 

from the front its a normal focus but from the rear its an st



Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#257 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 379 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 24 March 2013 - 07:32 PM

lol bet it looks confusing but then so does mine

 

from the front its a normal focus but from the rear its an st

 

My car is not to bad as back is st front is st and as i have st style exhuaust not to bad. I should have done my front rs the back standered focus with front end in rs green back in panther black that be confusing lol



#258 Brigante

Brigante

    Resident Ranter

  • FOC Supporters
  • 2,400 posts
  • Name: Charlie
  • Ford Model: Focus Ghia 1.6 115BHP
  • Year: 2005
  • Location: Nottinghamshire
Contributor

Posted 24 March 2013 - 07:38 PM

lol i know mate yours does look really good and like you said you do have both st front n rear ends, just the mks are different

 

mines a lot worse cause the front ends standard n the rear is st n i aint got an exhaust yet

 

 

its a shame you couldnt sell on your mk2 st front end cause i'd of had it off you



#259 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,457 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 24 March 2013 - 08:08 PM

i need to get some lowering springs soon has anyone used PI springs they lower the car my 35mm wanted some eibach but there bit more expensive and they are only 30mm


Looks even better in the day light mate,
Well done,
If it was mine id purchase a set of these stick on light brows in black from DMB
http://www.dmb.uk.co...headlight-brows
Will give the face of the car a more agressive appearance, a must in my opinion.

Will look even better when lowerd and side skirts fitted,
Just don't forget your adjustable rear camber bolts when lowering to save the rear tyres from excessive wear.

#260 gforce

gforce

    Too much time on the boards

  • True Ford Enthusiast
  • PipPipPipPip
  • 774 posts
  • Name: Gary
  • Ford Model: Ford Mondeo ST 2.2 TDCi
  • Year: 2005
  • Location: Tyrone

Posted 24 March 2013 - 09:51 PM

Looks superb mate, worth the wait and effort for defs! And as everyone says, will only get better with the skirts and lowering.

 

Well done!



#261 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 379 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 25 March 2013 - 10:03 AM

lol i know mate yours does look really good and like you said you do have both st front n rear ends, just the mks are different

 

mines a lot worse cause the front ends standard n the rear is st n i aint got an exhaust yet

 

 

its a shame you couldnt sell on your mk2 st front end cause i'd of had it off you

 

i swaped my front prefaclift st bumper with the faclift one or i would have sold it.

Looks even better in the day light mate,
Well done,
If it was mine id purchase a set of these stick on light brows in black from DMB
http://www.dmb.uk.co...headlight-brows
Will give the face of the car a more agressive appearance, a must in my opinion.

Will look even better when lowerd and side skirts fitted,
Just don't forget your adjustable rear camber bolts when lowering to save the rear tyres from excessive wear.

Thanks mate the brows do look good i have built in drl on my headlights so it look good on it i made some custom brows on my prefaclift st.when i get the car lowered il get my mate to do it as he knows whats he is doing.

 

Looks superb mate, worth the wait and effort for defs! And as everyone says, will only get better with the skirts and lowering.

 

Well done!

Thanks mate it was deffinatly worth the wait cant wait for the weather to warm up and snow to stop il get the whole car polished waxed etc and it look good as it be lowered and droped to da floor by the time weather warms up lol.

Attached Thumbnails

  • 1.JPG
  • IMG_3540.JPG


#262 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 379 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 25 March 2013 - 11:26 AM

just realised there is abit of gap between the bonnet and front wings and the head light the garage said they tried eveything but they couldnt get it any better anyone has any advice could it be some kind of bonnet adjusters etc.

Attached Thumbnails

  • IMG_5907.JPG
  • IMG_5906.JPG
  • IMG_5905.JPG


#263 Stoney871

Stoney871

    Resident Lawman

  • Super Mod
  • 13,774 posts
  • Name: Clive
  • Ford Model: Focus mk2 1.8 TDCI Sport
  • Year: 2007
  • Location: Devon
Contributor

Posted 25 March 2013 - 06:48 PM

There should be rubber stops on the frame somewhere that you can adjust.

#264 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 379 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 25 March 2013 - 09:47 PM

There should be rubber stops on the frame somewhere that you can adjust.

il have a look tommorw i no thers 2 rubber bits on each side of the bonnet but not sure if that what u mean i have a look tommor



#265 Stoney871

Stoney871

    Resident Lawman

  • Super Mod
  • 13,774 posts
  • Name: Clive
  • Ford Model: Focus mk2 1.8 TDCI Sport
  • Year: 2007
  • Location: Devon
Contributor

Posted 25 March 2013 - 10:35 PM

Yes, there should be two rubber bits that look like doorstops on threaded bolts.

Try winding the high side one down and see how it looks.



#266 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 379 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 26 March 2013 - 10:01 PM

Yes, there should be two rubber bits that look like doorstops on threaded bolts.

Try winding the high side one down and see how it looks.

 

i had a look today only rubber bit are on the bonnet and i adjusted it but no difference been told it might be the headlight as the not origanal light might be a bad mould if you get what i mean but il just leave it as you cant tell anyway plus im gona get some headlight brows which might help abit too.



#267 Stoney871

Stoney871

    Resident Lawman

  • Super Mod
  • 13,774 posts
  • Name: Clive
  • Ford Model: Focus mk2 1.8 TDCI Sport
  • Year: 2007
  • Location: Devon
Contributor

Posted 26 March 2013 - 10:07 PM

The aftermarket lights as you say may be a bit wonky.

Maybe they ban be bedded in better?



#268 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 379 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 26 March 2013 - 10:17 PM

The aftermarket lights as you say may be a bit wonky.

Maybe they ban be bedded in better?

 

sorry mate dont understand what you mean by "ban be bedded in better"



#269 Stoney871

Stoney871

    Resident Lawman

  • Super Mod
  • 13,774 posts
  • Name: Clive
  • Ford Model: Focus mk2 1.8 TDCI Sport
  • Year: 2007
  • Location: Devon
Contributor

Posted 26 March 2013 - 10:35 PM

Typo.
Meant to be 'can be bedded in better'

#270 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 379 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 27 March 2013 - 11:33 PM

Here is a quick video of the car the video is not good at all but il upload a better and longer video in next few days.



Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users