Couldn’t think of a better title! Basically I need the little bit of plastic that fixes the bit under the glove box to it. I had to remove it to replace a fuse and managed to lose the grey plastic plug. Essentially the bit that fits through the hole to fix it to underneath the glovebox. Really bad description so here is a photo of the area I am talking about. Any ideas where to source one?

Sent from my SM-G965F using Tapatalk

On 3/13/2020 at 7:23 PM, Stoney871 said:

Sent from my SM-G965F using Tapatalk
 

Carried out a completely professional edit and fixed the arrow for you. Yes I'm bored 😂

On 3/14/2020 at 11:12 PM, Luke4efc said:

Carried out a completely professional edit and fixed the arrow for you. Yes I'm bored 😂

Great thanks.

It is a bit blurry but looks like 1310061. What is the word that precedes the number? And where can I source one of these?

1310861, the bit before says "finis", it's a ford reference.

 

https://www.ebay.co.uk/itm/272913796872

 

Sent from my SM-G965F using Tapatalk

 

 

 

 

On 3/16/2020 at 5:12 PM, Stoney871 said:

1310861, the bit before says "finis", it's a ford reference.

 

https://www.ebay.co.uk/itm/272913796872

 

Sent from my SM-G965F using Tapatalk

 

 

 

 

I bought these but they don’t fit, see pictures. Any idea what other part it could be?

 

 

1 hour ago, adamd said:

I bought these but they don’t fit, see pictures. Any idea what other part it could be?

 

 

From the above image further up, looks like you're missing HM4 which is the rivit that goes in to the plastic and then you need the push clip that goes over it. 

Maybe double sided velcro? be much cheaper and porbably would hold better lol 🙂

2 hours ago, Monks600 said:

From the above image further up, looks like you're missing HM4 which is the rivit that goes in to the plastic and then you need the push clip that goes over it. 

Maybe double sided velcro? be much cheaper and porbably would hold better lol 🙂

Ah yes I thought the same shortly after my post, HM4 is missing 🤦🏻‍♂️
 

Velcro a good idea but the upside is plastic so won’t work. Will probably just use some strong wire I think!

Ah yes I thought the same shortly after my post, HM4 is missing [emoji2359]
 
Velcro a good idea but the upside is plastic so won’t work. Will probably just use some strong wire I think!

Or, maybe a screw with a washer? Sure just create it’s own thread when ***** in :)


Sent from my iPhone using Tapatalk Pro

Adhesive magnets?

Sent from my SM-G965F using Tapatalk

On 3/13/2020 at 7:23 PM, Stoney871 said:

Sent from my SM-G965F using Tapatalk
 

Where did you get this photo from please? I’d like to have a look and see if I can get the code for part HM4.

I may not need it as have done a temporary fix with wire but good to know all the same.

It was from Ford Microcat, a program i unfortunately no longer have.

Sent from my SM-G965F using Tapatalk

Found I still have working microcat on an old laptop.

The part (Finis) code for the upper bit labelled HM4 is 1310862.

 

 

 

Sent from my SM-G965F using Tapatalk

 

 

 

 

https://www.ebay.co.uk/itm/293493698358

Sent from my SM-G965F using Tapatalk