Jump to content
Do Not Sell My Personal Information


ECU LOCK KIT SWAP PROGRAMMING HELP!


Recommended Posts

Hi,

 

I have a 65 plate mk3 focus facelift 1.0 ecoboost zetec. It was bought as salvage with no keys and the ecu was damaged. 
 

a friend of mine had a full ecu lock kit. The part numbers matched so we continued to swap the clocks, ECU, fuse board thing (can’t remember the name), ABS, key barrel and keys 

 

car is starting fine. Cleared all codes using Forscan and ran basic settings. 
 

now I’m left with 3 faults 

Right rear wheel speed sensor C003A

left rear wheel speed sensor C0037

Lost communication with front distance sensor U0235 

 

all of them present as ABS faults and as you can see in the images it says “Additional fault system - incorrect component installed” 

 

is there anything I’ve missed in doing the ecu swap. This is my first Ford I’ve done this with 

 

any help will be greatly appreciated thanks 

 

 

916CFB8A-AB0F-46A8-AC5D-FC42396601F3.jpeg

C449520E-0458-442C-89B5-DA3B693BA299.jpeg

C429AB44-46DC-4190-8C8C-620FDA606299.jpeg

Link to post
Share on other sites

Hi, is the car LHD ? I see in the faults it is displaying distance in KM or is it that you have ForScan set to metric instead of imperial?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Forums


News


Membership