good day, I want to ask if anyone has encountered a problem.  Ford Focus 2.0 ecoblue 110KW (YLDA).  8F40 gearbox.  2019, 167,000 km. The car starts cutting, jerking and skipping at speeds of approx. 1200 - 1800.  it is impossible to determine exactly what it is.  when I turn and hold higher revs, the car goes normally, sometimes you can hear and feel as if it missed, slipped.  Forscan shows no error.

MAF sensor needs cleaning??? 

it's quick to do.

I know a lot of these early 2.0 Ecoblues suffered with injector issues, look at the injectors first

In my stupid opinion, these cars have a Variable Geometry Turbo and you should check the actuator of it immediately. 

Diesel Fords are very damage-sensitive cars...fact...i have issues on my own Ecoblue too...

Broken car catalyst with 27.000kms on my odo...

Of course mama Ford took the responsibility for their hardware failure and the car is on its way to the replacement of both DPF and catalyst for free due to the 8 year guarantee.

I have to admit that the dealership had no apprehension about the free cost replacement.

Lets see some pictures of the damage results...

Pictures from the exchaust of my car after service light lit...

Have a nice evening everybody from cloudy and warm Greece!!!

 

Hi suttech, did You sort out the problem? As I have the same and looking for a solution...