jenniferlosey1971 Posted June 18 Share Posted June 18 Hi I got a 2012 fusion it's not getting any spark. I put a new starter in it .and I check fuzes.i volt check the wire and they was getting a resistance 7 and it said that okay and I check gas coming out and in the jets that was working I check the crank shaft sencer resistance was in good range .help plz 1 Quote Link to comment Share on other sites More sharing options...
unofix Posted June 18 Share Posted June 18 No start, no spark, no codes = no idea. Quote Link to comment Share on other sites More sharing options...
jenniferlosey1971 Posted June 18 Author Share Posted June 18 It cranks but don't start check the spark plug against the fram to see if I get spark and don't I don't know if I got any coded cause I don't have a scanner to check Quote Link to comment Share on other sites More sharing options...
unofix Posted June 18 Share Posted June 18 Without the DTC's you are not going to make much progress. Download FORScan (its free for windows laptops): https://forscan.org/download.html vLinker FS cable : https://www.amazon.co.uk/Vgate-vLinker-Adapter-FORScan-MS-CAN/dp/B0952P4MLP The chances of just randomly replacing parts in the hope it will fix the car will get very costly. Get the DTC's and then you can do some fault finding. 1 Quote Link to comment Share on other sites More sharing options...
Paulkp Posted June 18 Share Posted June 18 Page 12.14 of the Haynes Manual covers putting the instrument cluster into self test mode, Test 10 refers to DTC. it won't be as good as Forscan, but it is free, (apart from buying a book which will be useful for a number of things !) and you can do it in the comfort of your driver's seat. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.