Skip to content
View in the app

A better way to browse. Learn more.

Ford Owners Club - Ford Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.



Join the Independent Ford Owners' Club

Our community has been built by enthusiasts, for enthusiasts, and proudly run by Ford owners' for over 18 years. As an independent, non-official club, everything you’ll find here, advice, support, and opinions, comes directly from members with genuine Ford ownership experience.

Join our friendly community... it's Free!

 

What parts I need to retrofitting parking sensor at rear

Featured Replies

Can someone given me the info about parts list I need for parking sensor that I going fitting at rear only.
I know wiring harness and module but I want what part number, and maybe I find breaker to get sensor.

I aware that there lots info around parking sensor fitting but for me, I want all parts that I need and correction part ID number.
My Focus is 2013 (62 plate) Titatium 1.0 EcoBoost. I got photo connector that I found. I think mine is Race Red for parking sensor colour (dont like black dotting across rear bumper!)
IMG_3694(1).thumb.jpg.ef5f707e39ab5b1a080f8d098fcf971f.jpg



The sensors are available in Race Red.  But the sensor brackets/holders don't seem to be.

 

Park aid module - rear sensors - not automated parking: 1834575

Genuine Ford Kuga Focus C-Max Rear Parking Distance Aid System Module 1834575 | eBay

 

Sensors - hatchback - not automated parking - Race Red (x4): 1789527

Ford Parking Sensor 1789527 | eBay

 

Outer parking sensor brackets - not available in red (x2) [White]: 1772292

Genuine Ford Parking Sensor Holder Bracket 1772292 | eBay

 

Inner parking sensor brackets (x2)

White: 1772476
Colorado Red (previous name for Race, likely the same colour): 1723287

 

Wiring loom - over 20 different options!  Depends on whether you have keyless entry or just keyless start, and whether you have BLIS (I'm assuming not) and then automated parking or not.  The correct part number could be 1779835, but honestly I would want that double checked.

 

However, in the process of searching for a loom, I found this one with Race Red sensors...maybe worth just trying that! :wink: 

Ford Focus REAR Parking Sensor Harness Loom MK3 11-14 BV6T-15K868-ADE Race Red | eBay

 

1 hour ago, TomsFocus said:

The sensors are available in Race Red.  But the sensor brackets/holders don't seem to be...

Tom, you never fail to come up trumps, pleasure to read your posts...

  • Author
1 hour ago, TomsFocus said:

The sensors are available in Race Red.  But the sensor brackets/holders don't seem to be.

 

Park aid module - rear sensors - not automated parking: 1834575

Genuine Ford Kuga Focus C-Max Rear Parking Distance Aid System Module 1834575 | eBay

 

Sensors - hatchback - not automated parking - Race Red (x4): 1789527

Ford Parking Sensor 1789527 | eBay

 

Outer parking sensor brackets - not available in red (x2) [White]: 1772292

Genuine Ford Parking Sensor Holder Bracket 1772292 | eBay

 

Inner parking sensor brackets (x2)

White: 1772476
Colorado Red (previous name for Race, likely the same colour): 1723287

 

Wiring loom - over 20 different options!  Depends on whether you have keyless entry or just keyless start, and whether you have BLIS (I'm assuming not) and then automated parking or not.  The correct part number could be 1779835, but honestly I would want that double checked.

 

However, in the process of searching for a loom, I found this one with Race Red sensors...maybe worth just trying that! :wink: 

Ford Focus REAR Parking Sensor Harness Loom MK3 11-14 BV6T-15K868-ADE Race Red | eBay

 

Thanks! I'll find see if I can get completed used wiring loom with sensor, thank you.

That sensor at wiring loom one seen it's had more metallice paint? Seen be seller mistaken as title race red instead of ruby red since it's look darker red?
I think mine is race red as it's glossy red. I havent checked paint code since my Focus is at garage at moment.

45 minutes ago, Tomush said:

That sensor at wiring loom one seen it's had more metallice paint? Seen be seller mistaken as title race red instead of ruby red since it's look darker red?

I think mine is race red as it's glossy red. I havent checked paint code since my Focus is at garage at moment.

Ah, yes you might be right.  That's a shame.

Would be good to see your colour code to double check when you get the car back.

  • Author
On 9/2/2024 at 4:43 PM, TomsFocus said:

Ah, yes you might be right.  That's a shame.

Would be good to see your colour code to double check when you get the car back.

Sorry long replied as I was bit busy and got car back few days ago and paint code was [ Z C ] which I think it's Race Red.

15 minutes ago, Tomush said:

Sorry long replied as I was bit busy and got car back few days ago and paint code was [ Z C ] which I think it's Race Red.

Yes, that is Race Red.

  • Author
2 hours ago, TomsFocus said:

Yes, that is Race Red.

Cheers as rear parking sensor I might getting whole rear bumper damaged or not as I can used it as parking sensor fitting.

  • 2 months later...
  • Author

@TomsFocus pardon me, I nearly completed ordering soon, as I have listed following, correct anything I done wrong:
Also I had keyless system with start/stop button but no keyless entry.

My eBay Watchlisted:
FOCUS Mk3 Completed rear bumper with FOUR parking sensors.
Parking Module - 1834575 (AK?)

Question is what bolt/clip that Ford used to mounted the parking module on chassis?
No need Fordscan to unlocked it?

13 minutes ago, Tomush said:

Question is what bolt/clip that Ford used to mounted the parking module on chassis?
No need Fordscan to unlocked it?

Looks like 2 plastic push rivets for the park module.  Part number 3001337.

10x Front Grille / Slam Panel Clips for some Ford Edge, Mondeo, Mustang, Galaxy | eBay

 

I think you will need Forscan to add sensors to the radio display.  They might work for sound only without Forscan, but I don't know for sure.

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

The "Digestive"






Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.