Hello all.

I am being given a 13plate Focus 1.6 diesel estate but its lacking the cruise control. Does anyone have the link to the guide I have seen linked in other posts on installing/setting it up please, as its something I would rather have than not, if it can be retrofitted as I do alot or motorway trips. As the link I found below doesn't work

http://www.fordownersclub.com/forums/tutorials/article/274-retrofitting-original-cruise-control-on-a-focus-mk3/

 

I did try searching "focus mk3 cruise control guide" but was getting 3k plus posts to sift through.

 

Many thanks

You'll need the steering wheel with switches or add the switches and the steering wheel harness to your current steering wheel.

You will then need to activate CC and ASL in central configuration using FORScan

So on the steering wheel the phone controls are on the right silver part, but been looking at steering wheels with the cc controls and most have the phone controls on the lower right opposite from the cc controls. I want to make sure I get the correct wheel also assuming the airbag from mine will go in the one I buy or will it be a different one I also need to buy. Photo is one I found online which matches the one in the car I want to add cc to.

Right so I got the steering wheel with CC module but upon taking my airbag off, I don't have any wire to connect into the green socket that came attached to the wheel 2nd pic is the wheel I bought and last one is my current wheel

You need to change the clock spring for one that supports CC

Got it sorted now, managed to get a set of switches with green connector on and all looks good, it displays on the cluster when limiter or CC is switched on.