Just bought a 2014 Sedan for my son, rear drivers door had a pretty good dent. I found one in a junk yard for cheap and paint matched so I swapped them out. Now, the windows and doors work via the drivers controls, but the controls on the door do not. Also, the rear door shows up as being open in the warning screen, even though it is closed. I tried connecting a jumper wire from the positive battery terminal to the unconnected negative battery cable as I seen in a video to reset the modules, but that did not work. Any ideas on why the door is showing open and the window control does not work? 

Fit the door harness, door module and door latch assy from the original door to your donor door