Hi I’ve been planning to replace my auxiliary drive belt. 

The replacement I’ve bought is FINIS 1760376 (Belt code 6PK 1213). 

However the current one on there is 6PK 1249SF.

Reading into the belt codes they’ve got the same cross section (6PK) but different overall length. 

The replacement is 36mm shorter in overall length. This is going to be very difficult to fit in my mind so I’ve not attempted yet.

I understand the belts are stretch ones but to stretch plus the additional 36mm seems excessive to me and likely to cause damage.

Can anyone advise if this is correct / normal and I should have no issue fitting. 

Or have I got the current routing of the belt incorrect or has a different size pulley on the water pump, idler pulley, alternator or crank been used which may account for the longer belt currently being used?

 

You have the wrong part. 

@unofix ahhhh I see. But the parts catalogue only shows this belt? 

Should I contact Ford directly for the correct part number or can anyone advise on here correct part number?

Or shall I get the matching part number off the belt I currently have?

If you enter your VIN number here you should be able to get the correct Finis code:

https://catalogs.ssg.asia/ford/?lang=en

This is what I used strangely just double checking now. 
 

8620 - 1760376 that’s what I’ve got??
 

 

https://www.autodoc.co.uk/gates/7181735

 

6PK1249SF equates to 1760376

6 minutes ago, willdudeuk said:

8620 - 1760376 that’s what I’ve got??

I think you have been supplied with the wrong part. The Finis code is correct for a 6PK1249SF

The 1760376 from Official Ford Store (eBay) has come as 6PK 1213.

Is this a superseded number? Or have I been sent wrong part. Everything seems to match on the packaging wand part in terms of the long WERS / Engineering part number. 
 

 

 

The packaging looks correct, not so sure it is the correct belt.

Personally I'd buy the belt from Autodoc and feel happy that I was using the correct size.

Just found this online.

Ford Focus C-Max new genuine 1.8 & 2.0 Duratec V drive belt 1760376. Fits the following models: From: 30-05-2011 On: 29-07-2011 Focus 1.8 C-Max 2008- From: 09-01-2008 To: 23-07-2010 Saarlouis Plant Construction: 30-05-2011 To: 29-07-2010 7-2018 1 Focus 2.0 2008- From: 09-01-2008 To: 23-07-2010 Saarlouis Plant Built Old belt 7M5Q-6C301-DA, FINIS- 1517566 is replaced by new belt BM5E-6C301-AA, FINIS- 176000 17600 376. Length of old belt was 1249, new belt length is 1213. Part with FINIS-1760376 is made of a new, stretch material and fits instead of the old part. This replacement was confirmed by responsible engineer. Please make sure this part number is compatible with your vehicle, if you are not sure, please message us with your vehicle chassis number and we will confirm. This is a new original part delivered in Ford packaging.

Thanks @TomsFocus where did you find this please can you provide the link?

18 minutes ago, willdudeuk said:

Thanks @TomsFocus where did you find this please can you provide the link?

I was hoping to find a better source but this is where I found it.

Ford Focus New Genuine V Drive Belt 1760376 : Amazon.nl: Automotive

Thank you @TomsFocus. I’ll see how the fitting goes! Seems like it should be able to stretch as per your message above.