So that's how you hatchback chaps have two reverse and two foglights! Clever!

My conversion was similar, except i had to run fresh cable (both sides) to the bumper area, as the estate version has no lights in the rear bumper.

I bought a left hand drive main rear light, plus a left hand drive reverse light to carry out my conversion.

So my fogs are roughly half way up the car, housed in the lower sections of the main rear light clusters, the reverse lights, in the same position as you chaps...

How did you manage to fit st rear bumper?

However it looks Awesome.

Yunii

Sent from my GT-I9505 using Ford OC mobile app

How did you manage to fit st rear bumper?

However it looks Awesome.

Yunii

Sent from my GT-I9505 using Ford OC mobile app

took him around two months to custom build that bumper specific

just to clear up and confusion, the plug on the right in the image below is what most people doing this mod will need, as the part on the left in the image already comes with a new LHD clear lens

with regards to polarity issues etc the pins are number 1 & 2 so a simple volt meter check will verify which pin is positive IIRC pin1 is positive

Bear in mind they are hard to find in breakers & charge £15 + for one.

Yunii

Sent from my GT-I9505 using Ford OC mobile app

Just to confirm but the connectors suggested by troy45 are

a perfect fit into the bulb holder.

Glad to hear it :)

Another nice guide, so if I just want the lenses to match. I just need a lhd lens and a red fog light bulb. :)

Another nice guide, so if I just want the lenses to match. I just need a lhd lens and a red fog light bulb. :)

correct

Cree bulbs are also a good upgrade

Ok cool, will look in to it. :)

Ok cool, will look in to it. :)

no prob,

Just to inform aswell:

If you click on my avator pic to the left of my posts,

It will bring you to my profile page where you will see links to my 28 Guides may be some more of interest.

Guide to Fitting Genuine focus Mk2.5 ZetecS rear Diffuser Click Here

Guide to Fitting Genuine focus Mk2.5 ZetecS Front Lip spoiler Click Here

Is Your Focus Rusting Click Here For More Information

Guide To Activating Single & Multi Door Unlock on yor Ford Click Here

Guide To Spraying Rear View Mirror Click Here

Guide To Changing Lower Front Grill On Mk2.5 Focus Click Here

The Ultamate Reverse Bulb Click Here

Guide to Fitting Custom Built Climate Controls on Focus Click Here

Guide to Converting Rear Fog Light To Clear Click Here

Custom Lazer Cut Interior Parts For Your Ford Click Here

Ford Serial Number Without Removing Stereo Click Here

Guide to Fitting New Ford Mist Type Jets on all Models Click Here

Guide to Fitting additional Boot Light Click Here

The Ultimate Rear Seat Protection Click Here

Guide To Storing Vehicle For Long Periods Click Here

Guide To Fitting ST Gauge Pod To Focus Dash Click Here

Guide To Fitting Focus Led Badge Light Click Here

Guide To Fitting Second Reverse Light Ford Focus Mk2.5 Click Here

Guide to Fitting Auto Dimmer Unit to Gauges or DRL's Click Here

Guide to Fitting additional 12v Socket in Boot of Focus Click Here

Full ZetecS Kit Fitted to Mk2.5 Focus Click Here

Guide to Fitting Footwell Lighting In Your Ford Click Here

Guide to Induction Filter Upgrade in Your Ford Click Here

Guide to Fitting Custom Bonnet Dampers Focus Mk2 & Mk2.5 Click Here

Guide to Wiper Blade Change Focus Mk2 Mk2.5 Click Here

Guide to Fitting EGR Blanking Plate 1,6TDCi Click Here

Guide to fitting Ford puddle lights Focus 05-12 Click Here

Guide to Fitting Genuine focus RS LED tail lights Mk2.5 Click Here

.

Nice one, cheers Lenny. :D

I have one of these multiplug spare if anyone is interested pm me.

As i got a pair when i ordered from www.motorhogg.co.uk ( formerly known as Doncaster motor spares.

Yunii

Sent from my GT-I9505 using Ford OC mobile app

I've still got some spares of the 2-pin connector too if anyone doesn't fancy hunting a used one down or buying the new bits from RS-Online

One of the uprated CREE type bulbs which Lenny recommended http://www.alltronix.co.uk/index.php?main_page=product_info&products_id=517 landed today and I fitted it in one side to compare to the earlier CREE's suggested at the start of this thread.

Can see the new bulb (rhs) lights up more of the lamp, will see if it's brighter once it goes dark.

Cheers Lenny, another good guide another mod done! :D

I even used the second wire of the twin I ran across the boot trim for the second reverse light to return a second Fog light feed, which is now all wired up an ready to go... as soon as I can find another lamp to massacre with a good bulb holder that is!

whilst in the wiring mood I ran a few feeds from the brake, reverse and boot lights in case that ford badge light and some boot/glove box SMDs I ordered a few weeks ago ever turn up . In the mean time ive got a top mount to swap out, gearbox fluid to change and a DPF to remove, happy day! :D

ive got a pic of the difference between the normal reverse bulb and the cree and its night an day of a difference, its not letting me post just now but the Cree Lenny mentions is good value and so far without any issues.

Day shots

single fog lamp, will be adding a second one on the left soon

Update confirmed Genuine Supplier of Cree.

There have been reports from members whom purchased cree bulbs from China on eBay only to be disappointed the don't illuminate at all or low quality light.

I would like to attempt to prevent further disappointment by saying:

Alltronix are a UK based stockiest of genuine cree bulbs from America not replicas from China,

Here's the first model: http://www.alltronix.co.uk/index.php?main_page=product_info&products_id=275

Here's the latest model:

http://www.alltronix.co.uk/index.php?main_page=product_info&products_id=517&zenid=5ks0ka90l21m05jftihl4kmjk0

Here's the rear fog:

http://www.alltronix.co.uk/index.php?main_page=product_info&products_id=322

Hi lenny what red bulb did you go with in the end and do you have any pics

thanks in adv

Hi lenny what red bulb did you go with in the end and do you have any picsthanks in adv

Went for the red cree Q5 see link:

http://www.alltronix.co.uk/index.php?main_page=product_info&products_id=322&zenid=a67gijt8ujbv6a8rii7mmg02o7

Ill get some pictures now,

Went for the red cree Q5 see link:

Ill get some pictures now,

I've got red bulb in but it looks pink cheap crap I think

Incandescent red bulbs do indeed look too pink.

Red Cree bulbs are proper red.

Incandescent red bulbs do indeed look too pink.

Red Cree bulbs are proper red.

I was looking at these are they ok http://www.ebay.co.uk/itm/291222931872?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

I was looking at these are they ok http://www.ebay.co.uk/itm/291222931872?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

thats a fake cree bulb, genuine red cree led have a frosted lens to better spread the red signal light,

Only white cree have clear magnified lens,

I've got red bulb in but it looks pink cheap crap I think

here's pictures of genuine red cree ba15s bulb purchased from reliable uk seller of genuine cree bulbs alltronix.co.uk

cool that will do me so much red thanks for the pics there great

looks like I will go with the whites as well

Could I humbly suggest these? -

http://pages.ebay.com/link/?nav=item.view&id=350942095449&alt=web