paulaldo Posted April 27, 2012 Share Posted April 27, 2012 i have just bought a new gear knob for my focus zetec s .How do i get the base of the leather gaitor off the centre console so i can take ithe old gear knob off Quote Link to comment Share on other sites More sharing options...
artscot79 Posted April 27, 2012 Share Posted April 27, 2012 you dont need to the boot slides down over the shaft ooerr and the knob unscrews at least it has on every ford ive had the base is removed using a flat blad screwdriver lever it gently at the end nearest the dash Quote Link to comment Share on other sites More sharing options...
alkyz89 Posted April 27, 2012 Share Posted April 27, 2012 i used a clean flat wallpaper scrapper with a bit of kitchen towel for protection... and gently lifted the silver surround from the front (the bit nearest the handbrake) once thats off just unscrew the gear head. bare in mind the leather and silver trim are all attached... hope this helps Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted April 27, 2012 Share Posted April 27, 2012 +1 Quote Link to comment Share on other sites More sharing options...
Nigel S Posted April 28, 2012 Share Posted April 28, 2012 Has someone been scanning their Haynes manual? If so: Refitting is the reverse of removal!!! Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted April 28, 2012 Share Posted April 28, 2012 Has someone been scanning their Haynes manual? If so: Refitting is the reverse of removal!!! Not me sir, that's copyright infringement. ;) And yes. :) Quote Link to comment Share on other sites More sharing options...
dexter666 Posted April 28, 2012 Share Posted April 28, 2012 Have i come on the right forum.'shaft,knob' ha ha Quote Link to comment Share on other sites More sharing options...
PaulB1803 Posted April 29, 2012 Share Posted April 29, 2012 You've come on the forums??? you dirty beggar! :P Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted April 29, 2012 Share Posted April 29, 2012 Fnar Fnar Quote Link to comment Share on other sites More sharing options...
deltadeluxe Posted December 5, 2012 Share Posted December 5, 2012 hi all ,can anyone tell me what gearstick knob fits a ford focus 1.6 zetec, ive tryed sevrel with know success, anyone help me please .want a change from the ford one . Quote Link to comment Share on other sites More sharing options...
Aldoo Posted December 6, 2012 Share Posted December 6, 2012 iv got the richbrook ford one fitted to mine ..just pull the gaiter down and unscrew. no need to remove the surround :) Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.8f1741a19c871c79dea52d1192ffb6a3.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.