Skip to content
View in the app

A better way to browse. Learn more.

Ford Owners Club - Ford Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.



Join the Independent Ford Owners' Club

Our community has been built by enthusiasts, for enthusiasts, and proudly run by Ford owners' for over 18 years. As an independent, non-official club, everything you’ll find here, advice, support, and opinions, comes directly from members with genuine Ford ownership experience.

Join our friendly community... it's Free!

 

Number Plate Bulbs

Featured Replies

ok guys my number plate lights are rubbish want new ones any ideas must be legal and 5w5 bulbs



I think some use a LED light.

LED'S the only other option really mate, loads on eBay, legal and a lot more white than the standard rubbish.

I got these ones - seem to work fine:

http://www.ebay.co.uk/itm/290690561037

  • Author

those would be good but wrong bulbs for my car like

Search for the right ones that are similar then? Was only guidance as to what has been ok....

I used these on mine. Work perfectly well.

I tried to change mine but could never get the !Removed! bulb holders out :( Managed to prize both lights from the boot lid a fair way, but never enough to get the original bulbs out. Had to give up in the end.

I tried to change mine but could never get the !Removed! bulb holders out :( Managed to prize both lights from the boot lid a fair way, but never enough to get the original bulbs out. Had to give up in the end.

Assuming yours is a mk2.5 then a very thin screwdriver slotted into the inner side of the light should release the spring and then the bulb unit should drop out. Then the grey bulb holder with about a 1/4 turn should come out easily enough

Assuming yours is a mk2.5 then a very thin screwdriver slotted into the inner side of the light should release the spring and then the bulb unit should drop out. Then the grey bulb holder with about a 1/4 turn should come out easily enough

Yeah that's what I read somewhere, but couldn't for the life of me get it out. Pushing the screwdriver in just broke the clip, and no amout of wiggling seemed to help unfortunately. Thanks for the info though, might give it another bash tomorrow!

If you've nacked the clip i believe you can remove the trim from inside the hatch and unclip the light from there.

Soft touches, soft touches is all I would say!

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

The "Digestive"






Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.