Any one done this yourself? I used to own a Toyota Yaris before this and that was simple, the plastic casing at the back would pop off and you could unscrew the bulb and change it in under a minute. Looking at the fiesta though, there's 2 screws on the actual light case which require a t25 bit and a bolt at the back fixing it to the car. Surely there's an easier way than having to take the whole light off? I haven't got a manual with my car to check the right way to do it. Any help would be great.

Unfortunately the whole light unit needs to be taken out to access the bulbs. As you've said theres 2 screws at the front and a securing bolt accessed just above the wheel arch in the boot. Then theres a push clip on the out edge of the light. You just pull the light at the outer edge to get the unit out. Then the bulb holder is just clipped in

Cheers for that. At least now I know of the way to do it :D

Its not realy hard just abit of a kerfuffle lol. Its the same with the headlights. The full light unit has to come out to get into them realy

You should be happy you don't have a mk7 they have put a wing nut up the side of the boot behind the carpet in the most awkward position to undo

You should be happy you don't have a mk7 they have put a wing nut up the side of the boot behind the carpet in the most awkward position to undo

You should be happy, Focus has 2!

You should be happy you don't have a mk7 they have put a wing nut up the side of the boot behind the carpet in the most awkward position to undo

The mk6 is the same. Wingnut in the boot behind the carpet. The facelift model does away with it though