Hi,

I recently bought some LED's to replace my current Registration Bulbs on my Ecoboost Fiesta Zetec S MK7, but really struggling to get the actual bulbs out in the first place. I tried to do a bit of reading before doing so, trying a screw driver with a cloth over it pushing away from the car but I've had no luck what so ever! I've actually loosened one of the bulbs itself :(

Sorry to be annoying but can anyone help me out? It's stressing me out!

Assume they are the same fittings as pre-face lift? Raise the boot so you can see the fittings you should see a small notch at one end of the fitting, mine is colour coded around the glass bit. As you say small screw driver suitably protected and just prise it out. When it pops you should be able to manouvre the whole fitting out to get to the wiring connection which just pulls off then replace bulb and reverse to fit back in.

Good luck.

Best thing I've found ball ended Allen key cant do any damage just do as Phil says