Hey guys ive been a checking this site out for a while but this is my first post.

Ive recently changed my number plate lights to led on my zetrc s mk7 fez and it looks great but the holder seems to be loose on both sides and sometimes falls out whilst driving. Ive played around with it but still it wont sit still. Do I need to get a replacement? Or is there a way to fix it? Any help would be appreciated thanks

I had the same problem after changing mine, if you look you will see they are held in by a metal clip that push close to the light when you push it back it but springs out again when it sits in place keeping it up in the gap, just bend the clip out from the light abit more, will be harder to get back in but mine havnt come out in 8months so works good better than buying new ones!!

I had the same problem after changing mine, if you look you will see they are held in by a metal clip that push close to the light when you push it back it but springs out again when it sits in place keeping it up in the gap, just bend the clip out from the light abit more, will be harder to get back in but mine havnt come out in 8months so works good better than buying new ones!!

Yup thats what I did and solved my issue in the past too.

Sorry to hijack the thread but where did you get the eyebrows on your lights from? :-)

Will pm you

Will pm you

Thanks Mate!

Thanks guys, I'll play around with it later

Hi, I did the same thing... I just yanked the holder out and nackered the spring... I got the other one out okay once i realised it was a spring and not just clips lol! But I just wrapped the whole thing in masking tape and it held it tight :) I had the same problem with the first one I removed...I have since bought a new holder