Jump to content
Do Not Sell My Personal Information


Mondeo Auto Clunks Going Into Reverse


Ken1066
 Share

Recommended Posts

Hi, looking for some advice, I have just changed the OSF spring, since putting it all back together it now clunks going into reverse, however it doesn't do it when selecting drive, it was ok prior to changing the spring, I've noticed the other spring now needs replacing but don't think this is causing the clunking, any advise would be appreciated, regards Ken

Sent from my iPad using Ford OC

Link to comment
Share on other sites


I dont see how replacing a spring will have any effect on the gearbox!

My only fault could be that where you have jacked the car up, this has caused the gearbox oil to move about and potentially moved about any tiny metal shavings that may or may not have been in the gearbox oil.

I would recommend a gearbox oil change and hopefully this may solve your problems! If not, consider a gearbox software reflash.

How bad is the clunk?

Link to comment
Share on other sites

Thanks for input, the clunks not to bad, sometimes worse than others, I have checked all the mountings etc in case any had wear and had split when jacked up, but all seem okay, I have noticed the NSF spring is gone as well, not sure if this will contribute to the problem or not, checked oil level and alls good, will check further as suggested, much appreciated, Ken

Sent from my iPad using Ford OC

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership