hi can anyone advise, i have a 2014 ford fiesta sport van and i have installed 2014 st recaro heated seats, the seat loom is there but i am having trouble finding plug for heated seat switch

Think you need the centre console from one, the ST is the only one with the switches in the correct place for these seats, even TX with leather is different iirc.

mathew ive ordered the heater surround panel which will take the switches just having problems finding plug for switch now in dash, not sure if there is a additional part of loom needed and fords cant seem to help

The loom won't be present if it wasn't fitted, Ford have 3 iirc, one for non heated, one for the TX with leather as the switches are different and one for the ST, you'd need an ST one, however it may change the location of the switch for ESP and stop start switch as they are in different places etc, not sure if you'll lose that feature as the ST doesn't have stop start.

Ford might use 2 differnt looms ( high and low spec) although the fiesta van has heated seats as an option so the plug should be there, they usually tape it up to the rest of the loom if plugs aren't being used, or clip it onto a piece of trim so it looks like it's in use, it could be 150-200 away from where you think it should be.

All the mk7.5 seat switches are the same and in the same place, in front of the gear stick, on the mk7 they are on the seats. No other switches will be affected.

Mark On the passenger side seat there are 5 plugs from the seats in its holder and on the cars loom there are also 6 female connectors with loom going into each, drivers side I think there's 4 ? I will see if I can chase the loom back cheers for all your help