RyanM Posted February 20, 2017 Share Posted February 20, 2017 Hello all, I have a 2011 TXS on 2.2 and starting to have the dreaded DPF issues at 100K miles (diagnosed with a home code reader from an amber engine warning light). Does anyone have any experience / knowledge of a static regen using FORScan software? How long roughly will it take? Any possible dangers to look out for? Any help appreciated Ryan Quote Link to comment Share on other sites More sharing options...
Ryan_Tango Posted February 20, 2017 Share Posted February 20, 2017 I've used it on my mothers Mondeo not much to say really didn't really do much for my mothers because it was so blocked so we called out terraclean to do a DPF clean and it was like brand new not had a problem with it in over 2 years since and it was blocked badly. But if you want to try it first, flat surface and away you go, at the time I think it was in the service section of the programme I'll get back to you on this in a few ticks just gonna download the new software. Quote Link to comment Share on other sites More sharing options...
Ryan_Tango Posted February 20, 2017 Share Posted February 20, 2017 When you open the programme it and have connected your car, you will be able to see all the service procedures on the wrench/ spanner icon. Quote Link to comment Share on other sites More sharing options...
RyanM Posted February 21, 2017 Author Share Posted February 21, 2017 Great, thanks for the response Ryan I'll look into it further. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.